Web Menu

Product Search

Share

Home >> Product >> Valve Cover Gasket

Valve Cover Gasket

Mitsubishi Cylinder Valve Cover Gasket Elring China Manufacturer
Valve Cover Gasket

Mitsubishi Cylinder Valve Cover Gasket Elring China Manufacturer

Contact Now
  • Mitsubishi Cylinder Valve Cover Gasket Elring China Manufacturer
  • Mitsubishi Cylinder Valve Cover Gasket Elring China Manufacturer

Description

Product Description

GASKET,MITSUBISHI ENGINE VALVE COVER GASKET MD167815 ELRING 709.030

4A916D22
4B116D31
4D306G72
4D348DC82
4D358DC90，8DC91,8DC92
4D55/4D56/4D56T8DC90，8DC91,8DC92
4D56G15
4D56T/L200S6K
4D65T120SS
4DR5V31
4G134G54/L047G/V32
4G156G72/V33
4G156D16T
4G15MS4KN
4G32S6K
4G41/T120S4K
4G63-8V4G95L
4G636D95
4G63 S4M4D31
4G698DC91
4G69/ASMW300388G6D31
4G916A12
N31/4G936A12/6A13
N31/4G936D10
4M406D14
4M416D22










Hits:【Print】 Pre:Toyota Engine Top Valve Cover Gasket China ManufacturerNext:Mitsubishi Front Crankshaft Oil Seals China Supplier

Product Categories

Recommended Products

What factors influence the performance of industry rubber seals

The sealing effect of the sealing ring is related to the material characteristics of the sealing ring. There is also a close influence on other factors. For example, the speed of rotation, working temperature, working pressure, working medium, etc., today I will tell you about the four factors that affect the sealing performance of the sealing ring.

First, the speed of rotation

  When the rotation speed is very low (< 0.03m/s), it is necessary to consider the smoothness of the operation of the equipment and whether the operational appears "crawling" phenomenon. When the movement speed is very high (> 0.8m/s), the lubricating oil film may be destroyed, and the oil seal is not well lubricated and frictions heat, resulting in greatly reduced life. It is recommended that polyurethane or rubber and plastic oil seal work in the speed range of 0.03m/s ~ 0.8m/s. High-speed oil seals need to put forward higher requirements for structure and material, and the speed of household appliances oil seals can reach 20000rpm. Both wear and temperature resistance need to be met, and the concentricity requirements of dynamic sealing on the installation are relatively high.  

Second, the temperature of the working environment

  Low temperature will reduce the elasticity of rubber and plastic oil seals, resulting in leakage, and even the entire oil seal becomes hard and brittle. High temperature will make the oil seal volume expansion, soft, resulting in the oil seal friction resistance increases rapidly and the pressure resistance decreases. It is recommended that the continuous operating temperature range of ordinary polyurethane or rubber and plastic oil seals be -10 ° C to +80 ° C. For the high temperature and high speed requirements of the working environment, we need to choose to use fluorine rubber and PTFE, high temperature resistance and wear resistance is better, the low temperature environment is generally to -40 degrees, and the rubber performance is tested at high and low temperatures to ensure that the product quality meets the requirements.  

Third, the working pressure of machinery

  The oil seal has a minimum service pressure requirement. Oil seals with low friction and low starting resistance should be selected for low pressure work. Below 2.5MPa, polyurethane oil seal is not suitable; High pressure to consider the oil seal pressure deformation, need to use anti-extrusion stop ring, grooving processing also has special requirements.

Fourth, the working medium

  General sealing media are gasoline, oil, diesel, grease, and some static sealing dust. In addition to selecting the working medium strictly according to the manufacturer's recommendations, it is important to keep the working medium clean. Aging or contamination of the oil will not only cause the components in the system to fail, accelerate the aging and friction of the oil seal, but also the dirt in it may scratch or embed the oil seal, making the seal fail. Therefore, it is necessary to regularly check the quality of the oil and its cleanliness, and replace the oil filter or oil according to the maintenance specifications of the equipment. The air remaining in the oil in the cylinder will be compressed by high pressure, which will cause the oil seal to burn out or even carbonize. In order to avoid this situation, exhaust treatment should be carried out at the initial operation of the hydraulic system. The hydraulic cylinder should also run at low pressure and slow speed for a few minutes to confirm that the residual air in the oil has been drained before it can work normally.