Web Menu

Product Search

Share

Home >> Product >> Oil Seal >> Agriculture Oil Seal

Agriculture Oil Seal

Ford New Holland Tractor Half Shaft Seal Retainer Assembly China Manufacturer
Agriculture Oil Seal

Ford New Holland Tractor Half Shaft Seal Retainer Assembly China Manufacturer

Contact Now
  • Ford New Holland Tractor Half Shaft Seal Retainer Assembly China Manufacturer
  • Ford New Holland Tractor Half Shaft Seal Retainer Assembly China Manufacturer

Description

Product Description

FORD NEW HOLLAND TRACTOR HALFSHAFTSEAL&RETAINER ASEEMBLY

THE SEALS IS SUITABLE FOR REPALCING FORD NEW HOLLAND PART NUMBER： 81875227

PLS CONTACT TO US IF YOU NEED OTHERS

E5NN-6701-BA/83955247real crankshaft sealFord tractor
FONN-6700CA(87800696)Front Crankshaft Seal Fits Ford 2000-7000 & 2600-77710Ford tractor
81717872/E1ADKN7052A ,Seal Transmission Drive ShaftFord tractor
81808572FORD PTO OUTPUT SHAFT SEAL 4110Ford tractor
81809444
FORD NHtractor
81717245Live PTO input shaftFord tractor
81717077PTO Countershaft SealFord tractor
81803352Rear Axle OuterFord tractor
6988H(National)

BE2374EFront Crankshaft Oil Sealexcavator
81717512
Ford New Holland Fordson Dexta, Super Dexta
81717512SEALSFord
81718638 SEALSFord tractor
81718815Y RING
7K9202 OIL SEAL
7K9203 OIL SEALcaterpillar and for komatsu
7K9204OIL SEALcaterpillar and for komatsu
7K9212 OILSEALcaterpillar and for komatsu
A175651 VITON SEALdumper
A186708 VITON SEALdumper
ME-720186 SEALSMitsubishi
AH7736F/9-09724-010/011-08-97708-083-0 SEALSDIFFERENTIAL/NPR(4BD1)/ISUZU
AD7169F/Mc-806776SEALS
AH8390E/Mc-827472SEALS
12020-29600 SEALSMITSUBISHI
AD7168E/03434-16501 SEALS
AE7943ESEALSNISSAN

SEALS

 O RING
MY0085SEALStrailer
MY0077SEALS
MY0079SEALS
BA4113TKK/03442-13000SEALSAXLE
AH8078ENDKSEALS
83924923SEALSFord tractor
81817102ASEALSFord tractor
83944032SEALSFord tractor
81875227SEALSFord tractor
81717963SEALSFord tractor
81823109SEALSFord tractor
81710681SEALSFord tractor
81802652SEALSFord tractor
957E4250A1SEALStractor
80354121SEALSFord tractor
3228401R91SEALStractor
87802755SEALSFord New Holland
87301595SEALSFord tractor
84349929 VALVE SEALFord tractor
908077 SEAL VITONFord tractor
81717023SEALSFord tractor
81707264SEALSFord tractor
ME034976SEALSMITSUBISHI / FUSO FUSO TRUCK FM
MB161152SEALSMITSUBISHI Canter Truck
MB161134SEALSMitsubishi/Caterpillar
12857-16700 SEALSMitsubishi

SEALSMitsubishi

Hits:【Print】 Pre:Shaft Hub Oil Seal Tractor Oil Seal China SupplierNext:Automotive Pump Shaft Rubber Lip Oil Seal China Manufacturer

Product Categories

Recommended Products

What factors influence the performance of industry rubber seals

The sealing effect of the sealing ring is related to the material characteristics of the sealing ring. There is also a close influence on other factors. For example, the speed of rotation, working temperature, working pressure, working medium, etc., today I will tell you about the four factors that affect the sealing performance of the sealing ring.

First, the speed of rotation

  When the rotation speed is very low (< 0.03m/s), it is necessary to consider the smoothness of the operation of the equipment and whether the operational appears "crawling" phenomenon. When the movement speed is very high (> 0.8m/s), the lubricating oil film may be destroyed, and the oil seal is not well lubricated and frictions heat, resulting in greatly reduced life. It is recommended that polyurethane or rubber and plastic oil seal work in the speed range of 0.03m/s ~ 0.8m/s. High-speed oil seals need to put forward higher requirements for structure and material, and the speed of household appliances oil seals can reach 20000rpm. Both wear and temperature resistance need to be met, and the concentricity requirements of dynamic sealing on the installation are relatively high.  

Second, the temperature of the working environment

  Low temperature will reduce the elasticity of rubber and plastic oil seals, resulting in leakage, and even the entire oil seal becomes hard and brittle. High temperature will make the oil seal volume expansion, soft, resulting in the oil seal friction resistance increases rapidly and the pressure resistance decreases. It is recommended that the continuous operating temperature range of ordinary polyurethane or rubber and plastic oil seals be -10 ° C to +80 ° C. For the high temperature and high speed requirements of the working environment, we need to choose to use fluorine rubber and PTFE, high temperature resistance and wear resistance is better, the low temperature environment is generally to -40 degrees, and the rubber performance is tested at high and low temperatures to ensure that the product quality meets the requirements.  

Third, the working pressure of machinery

  The oil seal has a minimum service pressure requirement. Oil seals with low friction and low starting resistance should be selected for low pressure work. Below 2.5MPa, polyurethane oil seal is not suitable; High pressure to consider the oil seal pressure deformation, need to use anti-extrusion stop ring, grooving processing also has special requirements.

Fourth, the working medium

  General sealing media are gasoline, oil, diesel, grease, and some static sealing dust. In addition to selecting the working medium strictly according to the manufacturer's recommendations, it is important to keep the working medium clean. Aging or contamination of the oil will not only cause the components in the system to fail, accelerate the aging and friction of the oil seal, but also the dirt in it may scratch or embed the oil seal, making the seal fail. Therefore, it is necessary to regularly check the quality of the oil and its cleanliness, and replace the oil filter or oil according to the maintenance specifications of the equipment. The air remaining in the oil in the cylinder will be compressed by high pressure, which will cause the oil seal to burn out or even carbonize. In order to avoid this situation, exhaust treatment should be carried out at the initial operation of the hydraulic system. The hydraulic cylinder should also run at low pressure and slow speed for a few minutes to confirm that the residual air in the oil has been drained before it can work normally.