Web Menu

Product Search

Share

Home >> Product >> Oil Seal >> Bearing Seal

Bearing Seal

Automobile Viton High Quality Bearing Seals China Manufacturer
Bearing Seal

Automobile Viton High Quality Bearing Seals China Manufacturer

Contact Now
  • Automobile Viton High Quality Bearing Seals China Manufacturer
  • Automobile Viton High Quality Bearing Seals China Manufacturer

Description

Product Description

The sealing ring of a bearing is characterized in that: on one end face of a circular ring, two rounded bulges extend upward, and the inner diameter of the smaller bulges is matched with the outer diameter of the inner ring of the ball bearing, and the larger bulges are matched with the outer diameter of the ball bearing;The inner diameter of the sealing ring is not less than that of the inner ring of the ball bearing.

NUMBERNAME
ABS F 300001oil seal
ABS F 300005oil seal
JT-011seal ring
KRJT-011seal ring
KRJT-015seal ring
KRJT-017seal ring
KRJT-017seal ring
KRRE-099oil seal NBR
KRRE-100oil seal NBR
KRRE-101oil seal
KRRE-102oil seal
KRRE-105oil seal
KRRE-106oil seal
KRRE-107oil seal
KRRE-108oil seal
KRRE-109oil seal viton
KRRE-110oil seal
KRRE-114oil seal
KRRE-115oil seal
KRRE-117oil seal
KRRE-152oil seal
KRRE-156oil seal
KRRE-157oil seal viton
KRRE-158oil seal viton
KRRE-159oil seal viton
KRRE-160KRRE-160
KRRE-165oil seal
KRRE-166oil seal
KRRE-167oil seal
KRRE-168oil seal
KRRE-169oil seal
KRRE-170oil seal
KRRE-171oil seal
ABS F 15298oil seal
KRJT-030seal ring
62010186101000/KRRE-174oil seal
62010187101000/KRRE-175oil seal
KRRE-179oil seal
KRRE-180oil seal

Hits:【Print】 Pre:Hyundai Automotive Valve Seal China ManufacturerNext:Shaft Hub Oil Seal Tractor Oil Seal China Supplier

Product Categories

Recommended Products

What factors influence the performance of industry rubber seals

The sealing effect of the sealing ring is related to the material characteristics of the sealing ring. There is also a close influence on other factors. For example, the speed of rotation, working temperature, working pressure, working medium, etc., today I will tell you about the four factors that affect the sealing performance of the sealing ring.

First, the speed of rotation

  When the rotation speed is very low (< 0.03m/s), it is necessary to consider the smoothness of the operation of the equipment and whether the operational appears "crawling" phenomenon. When the movement speed is very high (> 0.8m/s), the lubricating oil film may be destroyed, and the oil seal is not well lubricated and frictions heat, resulting in greatly reduced life. It is recommended that polyurethane or rubber and plastic oil seal work in the speed range of 0.03m/s ~ 0.8m/s. High-speed oil seals need to put forward higher requirements for structure and material, and the speed of household appliances oil seals can reach 20000rpm. Both wear and temperature resistance need to be met, and the concentricity requirements of dynamic sealing on the installation are relatively high.  

Second, the temperature of the working environment

  Low temperature will reduce the elasticity of rubber and plastic oil seals, resulting in leakage, and even the entire oil seal becomes hard and brittle. High temperature will make the oil seal volume expansion, soft, resulting in the oil seal friction resistance increases rapidly and the pressure resistance decreases. It is recommended that the continuous operating temperature range of ordinary polyurethane or rubber and plastic oil seals be -10 ° C to +80 ° C. For the high temperature and high speed requirements of the working environment, we need to choose to use fluorine rubber and PTFE, high temperature resistance and wear resistance is better, the low temperature environment is generally to -40 degrees, and the rubber performance is tested at high and low temperatures to ensure that the product quality meets the requirements.  

Third, the working pressure of machinery

  The oil seal has a minimum service pressure requirement. Oil seals with low friction and low starting resistance should be selected for low pressure work. Below 2.5MPa, polyurethane oil seal is not suitable; High pressure to consider the oil seal pressure deformation, need to use anti-extrusion stop ring, grooving processing also has special requirements.

Fourth, the working medium

  General sealing media are gasoline, oil, diesel, grease, and some static sealing dust. In addition to selecting the working medium strictly according to the manufacturer's recommendations, it is important to keep the working medium clean. Aging or contamination of the oil will not only cause the components in the system to fail, accelerate the aging and friction of the oil seal, but also the dirt in it may scratch or embed the oil seal, making the seal fail. Therefore, it is necessary to regularly check the quality of the oil and its cleanliness, and replace the oil filter or oil according to the maintenance specifications of the equipment. The air remaining in the oil in the cylinder will be compressed by high pressure, which will cause the oil seal to burn out or even carbonize. In order to avoid this situation, exhaust treatment should be carried out at the initial operation of the hydraulic system. The hydraulic cylinder should also run at low pressure and slow speed for a few minutes to confirm that the residual air in the oil has been drained before it can work normally.